Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

08.06.2025 14:21

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

For this case there are devices called Metal oxide varistors (MOV).

This is 'the assistant's answer'

What is lightning?

How can I earn money through OnlyFans?

A circuit breaker is similar, but is resettable.

But it can get overloaded, and no longer works.

What does a fuse do?

Why do people smoke?

2024–10–10[John johnson John Johnson ]

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

2024–10–14 [Omar Gharbi Omar Gharbi ]

The Sun Is Causing Starlink Satellites To Drop From Space - Daily Kos

One is “what exactly is in a ‘surge protector’ ? ”

There are two important concepts here.

the problem then depends on "how fast does the fuse operate?".

What's the most valuable lesson you've learned in life, and how has it impacted your journey so far?

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

So, the voltage could go up to 500 volts, and the fuse will not open up.

(Dc diagram shown, AC is similar).

Why don't I get sleep at nights?

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

Meta buys a nuclear power plant (more or less) - TechCrunch

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

a photo is worth a thousand words.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

Scottie Scheffler's Wife Meredith Scheffler Gets Strong Message From PGA Tour Golfer - Athlon Sports

2024–10–16 [ OO OLAOYE OYEBODE ]

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

At least they know the answer if they wanted it.

Which country has the best and strictest legal system in the world?

This is the picture of an electronic coil of wire wound around a core of magnetic material.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

Does having the wrong address on my car insurance invalidate my policy?

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

An AC voltage/ current source, and an ac inductive load.

Edit 2024–10.

Aurora borealis lights up northern Nevada, Carson City skies - Carson Now

At one ohm, the resistor has a maximum of 1 watt power.

Here is a simplified AC power diagram.

nine

TIFF People’s Choice Award Winner ‘The Life Of Chuck’ Latest Indie To Test Box Office Revival With Neon Gifting Campaign – Specialty Preview - Deadline

This is where this question deviates from being a 'generic' question, and becomes more specific.

These devices are installed between the “hot” and “neutral” and protective ground.

Now when you have a certain ac resistance, then a current flows in a loop.

The bolt then partially travels down the line to your home.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

Upvotes:

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

In schematic diagrams this is the symbol for a fuse:

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

First Sentence:

It also is a device that limits the change in current flow.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

what exactly is a ‘surge’ protector?

These are simplified answers to the original question, and does not change anything I wrote above.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

eight

but I think this circuit , shows a few more pieces.

Because the load is inductive, the current lags the voltage.(by a bit).

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

He then describes Rainy Season and Lightning.

[old diagram got deleted by accident]

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

[image of Common-mode choke]

Barnstars:

One

This is where the MOV conducts again, and dissipated the energy.

The third is lightning and “how it gets conducted into a home.”

There are three different concepts here that are getting confused.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

but this device (an Inductor) … impedes the rapid changes in the current.

The other is “what does a “fuse” do?”

This device then solves the entire problem.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

I post the exact comment here.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

This one hit behind the barn.

A fuse is a non-resetable over current circuit protector.

The MOV will conduct when the voltage exceeds 50% of line voltage.

He then asserts :

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

He then describes the function of a fuse.

It seems Mohan does not understand the difference between a comment and an Answer.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

so, what happens?

But… the neutral is now “floating” because of the 1 ohm resistance.